- Sport Bike
- Shop-Tools
- Shop Tools
Tusk Crank Puller/Installer Tool
Tusk Crank Puller/Installer Tool
Part# 1177380002
"Customer service is priority #1 at Jake Wilson. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."
-Dan Thomas, CEO and Founder
Returns
We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.
Warranties
We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.
Have questions?
Live chat: Click here (Leave email if after hours)
Email:sales@jakewilson.com
Call us: 1 800 721-8253
7am-7pm Mon-Fri 8am-4pm Sat (Mountain Standard Time)
Special Notes:
- Will not fit the Yamaha Raptor 660 or Kawasaki Tecate 250.
- A must for assembling vertically split crankcases.
- Safely and easily pulls crank assembly into crankcase.
- Heavy-duty steel construction.
- Includes both male and female M10x1.25mm and M12x1.25mm adaptors to attach to crank assembly.
- The C-clip adaptor (part # 1329270001) is required for cranks that use a C-clip to hold the primary gear on (common on many Kawasaki models).
Tusk Crank Puller/Installer Tool Reviews
Your review could win you a $100 or $500 gift card! 
Each review submitted enters you into a $100 gift card monthly drawing, and a $500 gift card quarterly drawing!
0 of 0 people found this review helpful.
Awesome!
Jason in SK
Comments On Jun 18, 2013:A must have even if your only doing one rebuild! wicked quality and value in TUSK products! sure beats ruining your crank by pounding it in, versus sucking it in the proper way with this tool, worked on both my 2-stroke CR85 and 4-Stroke YZ250F.
Was this review helpful?
0 of 0 people found this review helpful.
what took me so long
Timothy in MI
Comments On Jun 01, 2013:no more heat & beat to fit
Was this review helpful?
0 of 0 people found this review helpful.
Get it done
FRANK in TX
Comments On May 28, 2013:This product worked without a hitch. I will continue to use all of their tools. I have purchased four different tools and all have preformed well not to mention how I enjoy saving money.
Was this review helpful?
0 of 0 people found this review helpful.
Worked great
Joshua in NB
Comments On May 21, 2013:This item works great for pulling cranks into their case however be careful when using the C-Clip adapter as I had problems with it.
Good item to have so you can save money if you rebuild your own bikes.
Was this review helpful?
0 of 0 people found this review helpful.
Good but need more adaptors
John in Virginia
Comments On May 20, 2013:Well made tool but needs to come with more adaptors. This tool will not work on the clutch side of the RM 85. It requires a left hand thread.
Was this review helpful?
0 of 0 people found this review helpful.
Dont use a Hammer !!! Buy the right tools
Neal in ON
Comments On Feb 24, 2013:I had to do a full engine rebuild on a 04 yz and this tool was worth every dime. Worked great had no issues and very well constructed very happy!!
Was this review helpful?
0 of 0 people found this review helpful.
Works as it should
Jeff in MI
Comments On Feb 15, 2013:Works very good, makes the process much easier
Was this review helpful?
0 of 0 people found this review helpful.
AWSOMENESS!
Paul in UT
Comments On Feb 17, 2013:This tool saved the day! makes quick work of pulling and especially installation of cranks! Love it, I would definately recommend!
Was this review helpful?
0 of 0 people found this review helpful.
Right tool for the right job.
KEVIN & JULIE in UT
Comments On Jan 02, 2013:Don't screw up expensive parts by jimmy rigging tools. (Sorry Jimmy!) Do it once, do it right with the right parts and tools.
Was this review helpful?
0 of 0 people found this review helpful.
Works well but needs improvement.
Ed in California
Comments On Dec 07, 2012:I rebuilt my 2012 RMZ450 using this tool.
Works well on the ignition side case but doesn't come with an adapter for the left hand threads on the clutch side. I had to grind/modify the adapter end so I could thread the primary gear nut on and use it to pull the case on to the crank. If it came with a left hand adapter I'd rate the tool 5 star.
Was this review helpful?
If you cannot see the videos you may need to upgrade Adobe Flash Player. 
Instructional
How To Split The Cases And Replace Crank Bearings (part 2)
How To Split The Cases And Replace Crank Bearings (part 1)
How To Split The Cases And Replace Crank Bearings (part 3)
Stay Connected!
© 2013 Jake Wilson, LLC All rights reserved. Unauthorized use of any images, thumbnails, illustrations, descriptions, or editorial content without written permission is strictly prohibited. Prices are subject to change without notice.